Loading...
Ampreg 3x Härter

Ampreg 3x hardener

Ampreg™ 3X hardeners are available in “fast”, “standard”, “slow”, “extra-slow” and “ultra-slow” hardener speeds and are suitable for Ampreg™ hand lay-up systems 30, 31 and 36 and Prime™ 37 infusion resin.

MAIN FEATURES

  • Low initial mixed viscosity and good cure characteristics at room temperature
  • Tough resin matrix for good mechanical properties of the laminate
  • Lloyds Register and DNV-GL certifications.

TDS_DE_AM30
TDS_DE_AM31
TDS_DE_AM36
TDS_DE_PRIME37

DE_Ampreg-3X-Adhesion-Promoter

SKU: N/A Categories: , , ,

Einloggen um Preise zu sehen.

Wenn Sie noch kein Kundenkonto eröffnet haben, kontaktieren Sie bitte Ihren Ansprechpartner bei CTM oder senden uns eine Zugangsanfrage.

Einloggen um Preise zu sehen.

Related products

  • Ampreg 31 Harz

    AmpregTM 31 resin

    The system has a higher run-off resistance than AmpregTM 30 and with the choice of 5 hardeners offers a complete system for almost any application. AmpregTM 31 is designed for excellent mechanical properties and offers optimum strength even with cold curing and moderate annealing at 50°C. The new LRT technology, through the use of simple black light lamps, allows easy inspection of work clothing and workplace for epoxy residues, making it easy to monitor employee health. MAIN FEATURES
    • Viscosity optimized for fabric application and run-off resistance
    • Good curing in ambient air
    • Robust resin matrix provides good mechanical properties of the finished laminate
    • Lloyd's Register & DNV certified

    TDS_DE_AM31

  • Ampreg 30 Harz

    AmpregTM 30 resin

    Optimized for the manufacture of large composite structures using hand lay-up and vacuum processes, AmpregTM 30 offers enhanced worker safety through careful selection of low-toxicity raw materials. The relatively low initial mixed viscosity of AmpregTM 30 allows for easy wetting through of heavy reinforcements. AmpregTM 30 was developed to provide excellent mechanical and thermal properties for both ambient temperature cures and moderate temperature (50°C) post-cures. This system is available with a range of curing speeds from fast to extra slow and in a variety of formats from small pack sizes to drums and IBCs. KEY FEATURES
    • Low initial viscosity of resin/hardener mixture
    • Good curing even without post-curing at elevated temperatures
    • Non-pigmented resins and hardeners
    • Improved safety and health aspects through LRT technology
    • Optimized for hand laminates
    • Excellent fiber saturation
    • Lloyd's Register & DNV certified

    TDS_DE_AM30

  • Ampro Bio Epoxyharz

    Ampro BIO – The sustainable

    AmproTM Bio is a multi-purpose epoxy and is made with over 40% organic content from pressed coconut shell oil, making it extremely sustainable. Together with flat fibers and Kerdyn PET foam made from recycled bottles, it is a sustainable alternative. The hardeners are the same as for the AmproTM system. MAIN FEATURES
    • Mixing ratio 3 : 1 by volume
    • No surface residues, even at +5°C
    • For bonding, laminating, filling and filleting
    • No armin redness

    TDS_DE_AMPRO_BIO