AmpregTM 31 resin
The system has a higher run-off resistance than AmpregTM 30 and with the choice of 5 hardeners offers a complete system for almost any application. AmpregTM 31 is designed for excellent mechanical properties and offers optimum strength even with cold curing and moderate annealing at 50°C. The new LRT technology, through the use of simple black light lamps, allows easy inspection of work clothing and workplace for epoxy residues, making it easy to monitor employee health.
MAIN FEATURES
- Viscosity optimized for fabric application and run-off resistance
- Good curing in ambient air
- Robust resin matrix provides good mechanical properties of the finished laminate
- Lloyd's Register & DNV certified
Datenblätter
Gefahrenhinweise
Related products
-
AmproTM Bio is a multi-purpose epoxy and is made with over 40% organic content from pressed coconut shell oil, making it extremely sustainable. Together with flat fibers and Kerdyn PET foam made from recycled bottles, it is a sustainable alternative. The hardeners are the same as for the AmproTM system. MAIN FEATURES
- Mixing ratio 3 : 1 by volume
- No surface residues, even at +5°C
- For bonding, laminating, filling and filleting
- No armin redness
Technische Datenblätter
Sicherheitsdatenblätter
-
CRYSTIC 489 PA Polyester resin isophthalic acid-based, low stryolemersion.
Technische Datenblätter
Sicherheitsdatenblätter
-
Ampreg⢠3X hardeners are available in "fast", "standard", "slow", "extra-slow" and "ultra-slow" hardener speeds and are suitable for Ampreg⢠hand lay-up systems 30, 31 and 36 and Prime⢠37 infusion resin. MAIN FEATURES
- Low initial mixed viscosity and good cure characteristics at room temperature
- Tough resin matrix for good mechanical properties of the laminate
- Lloyds Register and DNV-GL certifications.
Technische Datenblätter
Sicherheitsdatenblätter