CTM Homepage
Infusion

Das aufgeführte Produktportfolio stellt nicht das gesamte Produktsortiment der CTM GmbH dar. Sollten Sie Materialien vermissen, kontaktieren sie uns oder rufen Sie uns einfach an. Wir freuen uns über Ihre Anfrage! Die gezeigten Bilder dienen nur als Referenz, das tatsächliche Produkt kann abweichen. Bei den aufgeführten Preisen handelt es sich um empfohlene Nettoverkaufspreise zzgl. 19% Mehrwertsteuer.

Infusion

Showing all 2 results

  • Ampreg 3x Härter

    Ampreg 3x hardener

    Ampreg™ 3X hardeners are available in "fast", "standard", "slow", "extra-slow" and "ultra-slow" hardener speeds and are suitable for Ampreg™ hand lay-up systems 30, 31 and 36 and Prime™ 37 infusion resin. MAIN FEATURES
    • Low initial mixed viscosity and good cure characteristics at room temperature
    • Tough resin matrix for good mechanical properties of the laminate
    • Lloyds Register and DNV-GL certifications.

  • MEKP hardener

    Hardener MEKP for polyester based resins & gelcoats, adhesive resins. MEKP hardener is a universal standard MEKP for hand lay-up, fiber spraying, winding and centrifugal processes as well as for gelcoats, polymer concrete and many other processes. In addition to cobalt accelerators (Co), a much faster reaction with shorter demolding times can be achieved by using promoters such as dimethylaniline (DMA). Each UP resin requires a matched MEKP accelerator system. The required quantities depend on various factors, such as processing method, resin type, required processing and pot life, wall thickness, processing temperature, co-use of fillers and optimum metering quantity of MEKP and accelerator.