Ampreg 3x hardener
Ampreg⢠3X hardeners are available in "fast", "standard", "slow", "extra-slow" and "ultra-slow" hardener speeds and are suitable for Ampreg⢠hand lay-up systems 30, 31 and 36 and Prime⢠37 infusion resin.
MAIN FEATURES
- Low initial mixed viscosity and good cure characteristics at room temperature
- Tough resin matrix for good mechanical properties of the laminate
- Lloyds Register and DNV-GL certifications.
Related products
-
Ampro⢠hardeners are available in "fast", "slow" and "extra-slow" hardener speeds to fit Amproâ˘, Ampro BIO and Ampro SEAL resins. MAIN FEATURES
- Mixing ratio of resin to hardener of 100:30 by weight.
Technische Datenblätter
Sicherheitsdatenblätter
-
Optimized for the manufacture of large composite structures using hand lay-up and vacuum processes, AmpregTM 30 offers enhanced worker safety through careful selection of low-toxicity raw materials. The relatively low initial mixed viscosity of AmpregTM 30 allows for easy wetting through of heavy reinforcements. AmpregTM 30 was developed to provide excellent mechanical and thermal properties for both ambient temperature cures and moderate temperature (50°C) post-cures. This system is available with a range of curing speeds from fast to extra slow and in a variety of formats from small pack sizes to drums and IBCs. KEY FEATURES
- Low initial viscosity of resin/hardener mixture
- Good curing even without post-curing at elevated temperatures
- Non-pigmented resins and hardeners
- Improved safety and health aspects through LRT technology
- Optimized for hand laminates
- Excellent fiber saturation
- Lloyd's Register & DNV certified
Technische Datenblätter
Sicherheitsdatenblätter
-
Ampro is the improved successor to SP106, which has proven itself for many years. It is a multi-purpose epoxy system for gluing, coating and filling and is particularly suitable for the production of wood-epoxy composite components. AmproTM CLR hardener is recommended for highly transparent coatings. MAIN FEATURES
- Mixing ratio 3 : 1 by volume
- No surface residues, even at +5°C
- For bonding, laminating, filling and filleting
- No armin redness
Technische Datenblätter
Sicherheitsdatenblätter