Loading...
Ampro Epoxyharz

Ampro — The allrounder

Ampro is the improved successor to SP106, which has proven itself for many years. It is a multi-purpose epoxy system for gluing, coating and filling and is particularly suitable for the production of wood-epoxy composite components. AmproTM CLR hardener is recommended for highly transparent coatings.

MAIN FEATURES

  • Mixing ratio 3 : 1 by volume
  • No surface residues, even at +5°C
  • For bonding, laminating, filling and filleting
  • No armin redness

TDS_DE_AMPRO

SKU: N/A Categories: , , , , , , ,

Wenn Sie noch kein Kundenkonto eröffnet haben, kontaktieren Sie bitte Ihren Ansprechpartner bei CTM oder senden uns eine Zugangsanfrage.

Related products

  • Crystic Polyesterharz

    Crystic VE679

    Crestamould VE679 venyl ester resin & skincoat, pre-accelerated, low stryolemmision.

    TDS_EN_Crystic_VE679-03PA

     

  • Ampreg 36 Harz

    Ampreg 36 resin

    AmpregTM 36 is Gurit's premium epoxy laminating system and is particularly suitable for the production of large high-performance components. The excellent mechanical properties and the high glass transition temperatures (Tg) achievable by moderate annealing make the AmpregTM 36 system suitable for applications with high mechanical loads, especially also when high temperatures may occur. AmpregTM 36 is optimized for hand lay-up processes with and without vacuum, but can also be used in other processes such as RTM (resin transfer molding), vacuum infusion, pultrusion and filament winding. MAIN FEATURES
    • Improved impregnation of the fabric with lower initial compound viscosity.
    • Faster attainment of mechanical properties when cured in ambient air
    • Excellent bending performance without compromising tensile performance
    • Lloyd's Register & DNV certified

    TDS_DE_AM36

  • MEKP hardener

    Hardener MEKP for polyester based resins & gelcoats, adhesive resins. MEKP hardener is a universal standard MEKP for hand lay-up, fiber spraying, winding and centrifugal processes as well as for gelcoats, polymer concrete and many other processes. In addition to cobalt accelerators (Co), a much faster reaction with shorter demolding times can be achieved by using promoters such as dimethylaniline (DMA). Each UP resin requires a matched MEKP accelerator system. The required quantities depend on various factors, such as processing method, resin type, required processing and pot life, wall thickness, processing temperature, co-use of fillers and optimum metering quantity of MEKP and accelerator.

    TDS_DE_MEKP