Loading...
MEKP hardener

MEKP hardener

Hardener MEKP for polyester based resins & gelcoats, adhesive resins. MEKP hardener is a universal standard MEKP for hand lay-up, fiber spraying, winding and centrifugal processes as well as for gelcoats, polymer concrete and many other processes. In addition to cobalt accelerators (Co), a much faster reaction with shorter demolding times can be achieved by using promoters such as dimethylaniline (DMA). Each UP resin requires a matched MEKP accelerator system. The required quantities depend on various factors, such as processing method, resin type, required processing and pot life, wall thickness, processing temperature, co-use of fillers and optimum metering quantity of MEKP and accelerator.

TDS_DE_MEKP

SKU: N/A Categories: , , , , , ,

Wenn Sie noch kein Kundenkonto eröffnet haben, kontaktieren Sie bitte Ihren Ansprechpartner bei CTM oder senden uns eine Zugangsanfrage.

Related products

  • Ampro Epoxyharz

    Ampro – The allrounder

    Ampro is the improved successor to SP106, which has proven itself for many years. It is a multi-purpose epoxy system for gluing, coating and filling and is particularly suitable for the production of wood-epoxy composite components. AmproTM CLR hardener is recommended for highly transparent coatings. MAIN FEATURES
    • Mixing ratio 3 : 1 by volume
    • No surface residues, even at +5°C
    • For bonding, laminating, filling and filleting
    • No armin redness

    TDS_DE_AMPRO

  • Ampreg 36 Harz

    Ampreg 36 resin

    AmpregTM 36 is Gurit's premium epoxy laminating system and is particularly suitable for the production of large high-performance components. The excellent mechanical properties and the high glass transition temperatures (Tg) achievable by moderate annealing make the AmpregTM 36 system suitable for applications with high mechanical loads, especially also when high temperatures may occur. AmpregTM 36 is optimized for hand lay-up processes with and without vacuum, but can also be used in other processes such as RTM (resin transfer molding), vacuum infusion, pultrusion and filament winding. MAIN FEATURES
    • Improved impregnation of the fabric with lower initial compound viscosity.
    • Faster attainment of mechanical properties when cured in ambient air
    • Excellent bending performance without compromising tensile performance
    • Lloyd's Register & DNV certified

    TDS_DE_AM36

  • Ampreg 30 Harz

    AmpregTM 30 resin

    Optimized for the manufacture of large composite structures using hand lay-up and vacuum processes, AmpregTM 30 offers enhanced worker safety through careful selection of low-toxicity raw materials. The relatively low initial mixed viscosity of AmpregTM 30 allows for easy wetting through of heavy reinforcements. AmpregTM 30 was developed to provide excellent mechanical and thermal properties for both ambient temperature cures and moderate temperature (50°C) post-cures. This system is available with a range of curing speeds from fast to extra slow and in a variety of formats from small pack sizes to drums and IBCs. KEY FEATURES
    • Low initial viscosity of resin/hardener mixture
    • Good curing even without post-curing at elevated temperatures
    • Non-pigmented resins and hardeners
    • Improved safety and health aspects through LRT technology
    • Optimized for hand laminates
    • Excellent fiber saturation
    • Lloyd's Register & DNV certified

    TDS_DE_AM30