AmpregTM 30 resin
Optimized for the manufacture of large composite structures using hand lay-up and vacuum processes, AmpregTM 30 offers enhanced worker safety through careful selection of low-toxicity raw materials. The relatively low initial mixed viscosity of AmpregTM 30 allows for easy wetting through of heavy reinforcements. AmpregTM 30 was developed to provide excellent mechanical and thermal properties for both ambient temperature cures and moderate temperature (50°C) post-cures. This system is available with a range of curing speeds from fast to extra slow and in a variety of formats from small pack sizes to drums and IBCs.
KEY FEATURES
- Low initial viscosity of resin/hardener mixture
- Good curing even without post-curing at elevated temperatures
- Non-pigmented resins and hardeners
- Improved safety and health aspects through LRT technology
- Optimized for hand laminates
- Excellent fiber saturation
- Lloyd's Register & DNV certified
Datenblätter
Gefahrenhinweise
Related products
-
Ampro™ hardeners are available in "fast", "slow" and "extra-slow" hardener speeds to fit Ampro™, Ampro BIO and Ampro SEAL resins. MAIN FEATURES
- Mixing ratio of resin to hardener of 100:30 by weight.
Technische Datenblätter
Sicherheitsdatenblätter
-
AmproTM Bio is a multi-purpose epoxy and is made with over 40% organic content from pressed coconut shell oil, making it extremely sustainable. Together with flat fibers and Kerdyn PET foam made from recycled bottles, it is a sustainable alternative. The hardeners are the same as for the AmproTM system. MAIN FEATURES
- Mixing ratio 3 : 1 by volume
- No surface residues, even at +5°C
- For bonding, laminating, filling and filleting
- No armin redness
Technische Datenblätter
Sicherheitsdatenblätter
-
AmpregTM 36 is Gurit's premium epoxy laminating system and is particularly suitable for the production of large high-performance components. The excellent mechanical properties and the high glass transition temperatures (Tg) achievable by moderate annealing make the AmpregTM 36 system suitable for applications with high mechanical loads, especially also when high temperatures may occur. AmpregTM 36 is optimized for hand lay-up processes with and without vacuum, but can also be used in other processes such as RTM (resin transfer molding), vacuum infusion, pultrusion and filament winding. MAIN FEATURES
- Improved impregnation of the fabric with lower initial compound viscosity.
- Faster attainment of mechanical properties when cured in ambient air
- Excellent bending performance without compromising tensile performance
- Lloyd's Register & DNV certified
Technische Datenblätter
Sicherheitsdatenblätter