Loading...
Ampro Bio Epoxyharz

Ampro BIO — The sustainable

AmproTM Bio is a multi-purpose epoxy and is made with over 40% organic content from pressed coconut shell oil, making it extremely sustainable. Together with flat fibers and Kerdyn PET foam made from recycled bottles, it is a sustainable alternative. The hardeners are the same as for the AmproTM system.

MAIN FEATURES

  • Mixing ratio 3 : 1 by volume
  • No surface residues, even at +5°C
  • For bonding, laminating, filling and filleting
  • No armin redness

TDS_DE_AMPRO_BIO

SKU: N/A Categories: , , , , , , ,

Wenn Sie noch kein Kundenkonto eröffnet haben, kontaktieren Sie bitte Ihren Ansprechpartner bei CTM oder senden uns eine Zugangsanfrage.

Related products

  • Ampreg 3x HĂ€rter

    Ampreg 3x hardener

    Ampregℱ 3X hardeners are available in "fast", "standard", "slow", "extra-slow" and "ultra-slow" hardener speeds and are suitable for Ampregℱ hand lay-up systems 30, 31 and 36 and Primeℱ 37 infusion resin. MAIN FEATURES
    • Low initial mixed viscosity and good cure characteristics at room temperature
    • Tough resin matrix for good mechanical properties of the laminate
    • Lloyds Register and DNV-GL certifications.

    TDS_DE_AM30
    TDS_DE_AM31
    TDS_DE_AM36
    TDS_DE_PRIME37

    DE_Ampreg-3X-Adhesion-Promoter

  • Crystic Polyesterharz

    Crystic 489PA Polyester resin

    CRYSTIC 489 PA Polyester resin isophthalic acid-based, low stryolemersion.

    TDS_ENG_CRYSTIC489PA

  • MEKP hardener

    Hardener MEKP for polyester based resins & gelcoats, adhesive resins. MEKP hardener is a universal standard MEKP for hand lay-up, fiber spraying, winding and centrifugal processes as well as for gelcoats, polymer concrete and many other processes. In addition to cobalt accelerators (Co), a much faster reaction with shorter demolding times can be achieved by using promoters such as dimethylaniline (DMA). Each UP resin requires a matched MEKP accelerator system. The required quantities depend on various factors, such as processing method, resin type, required processing and pot life, wall thickness, processing temperature, co-use of fillers and optimum metering quantity of MEKP and accelerator.

    TDS_DE_MEKP