Das aufgeführte Produktportfolio stellt nicht das gesamte Produktsortiment der CTM GmbH dar. Sollten Sie Materialien vermissen, kontaktieren sie uns oder rufen Sie uns einfach an. Wir freuen uns über Ihre Anfrage! Die gezeigten Bilder dienen nur als Referenz, das tatsächliche Produkt kann abweichen. Bei den aufgeführten Preisen handelt es sich um empfohlene Nettoverkaufspreise zzgl. 19% Mehrwertsteuer.

CTM Startseite
Laminating
  • Ampro Epoxyharz

    Ampro — The allrounder

    Ampro is the improved successor to SP106, which has proven itself for many years. It is a multi-purpose epoxy system for gluing, coating and filling and is particularly suitable for the production of wood-epoxy composite components. AmproTM CLR hardener is recommended for highly transparent coatings. MAIN FEATURES
    • Mixing ratio 3 : 1 by volume
    • No surface residues, even at +5°C
    • For bonding, laminating, filling and filleting
    • No armin redness

    TDS_DE_AMPRO

  • Ampro Bio Epoxyharz

    Ampro BIO — The sustainable

    AmproTM Bio is a multi-purpose epoxy and is made with over 40% organic content from pressed coconut shell oil, making it extremely sustainable. Together with flat fibers and Kerdyn PET foam made from recycled bottles, it is a sustainable alternative. The hardeners are the same as for the AmproTM system. MAIN FEATURES
    • Mixing ratio 3 : 1 by volume
    • No surface residues, even at +5°C
    • For bonding, laminating, filling and filleting
    • No armin redness

    TDS_DE_AMPRO_BIO

  • Ampro CLR Härter

    Ampro CLR hardener

    AmproTM CLR is the improved successor of SP320 and SP115, which have proven themselves for many years. It is an extremely clear multi-purpose epoxy system with improved UV properties and is particularly suitable for coating natural wood and building surfboards. The resin base is AmproTM resin and the hardener is specially formulated. MAIN FEATURES
    • Extremely clear multi-purpose epoxy system
    • Mixing ratio 3:1 by volume

    TDS_DE_AMPRO

  • Ampro Härter

    Ampro hardener

    Ampro™ hardeners are available in "fast", "slow" and "extra-slow" hardener speeds to fit Ampro™, Ampro BIO and Ampro SEAL resins. MAIN FEATURES
    • Mixing ratio of resin to hardener of 100:30 by weight.

    TDS_DE_AMPRO
    TDS_DE_AMPRO_BIO
    TDS_DE_AMPRO_CLR

  • Ampreg 30 Harz

    AmpregTM 30 resin

    Optimized for the manufacture of large composite structures using hand lay-up and vacuum processes, AmpregTM 30 offers enhanced worker safety through careful selection of low-toxicity raw materials. The relatively low initial mixed viscosity of AmpregTM 30 allows for easy wetting through of heavy reinforcements. AmpregTM 30 was developed to provide excellent mechanical and thermal properties for both ambient temperature cures and moderate temperature (50°C) post-cures. This system is available with a range of curing speeds from fast to extra slow and in a variety of formats from small pack sizes to drums and IBCs. KEY FEATURES
    • Low initial viscosity of resin/hardener mixture
    • Good curing even without post-curing at elevated temperatures
    • Non-pigmented resins and hardeners
    • Improved safety and health aspects through LRT technology
    • Optimized for hand laminates
    • Excellent fiber saturation
    • Lloyd's Register & DNV certified

    TDS_DE_AM30

  • Ampreg 31 Harz

    AmpregTM 31 resin

    The system has a higher run-off resistance than AmpregTM 30 and with the choice of 5 hardeners offers a complete system for almost any application. AmpregTM 31 is designed for excellent mechanical properties and offers optimum strength even with cold curing and moderate annealing at 50°C. The new LRT technology, through the use of simple black light lamps, allows easy inspection of work clothing and workplace for epoxy residues, making it easy to monitor employee health. MAIN FEATURES
    • Viscosity optimized for fabric application and run-off resistance
    • Good curing in ambient air
    • Robust resin matrix provides good mechanical properties of the finished laminate
    • Lloyd's Register & DNV certified

    TDS_DE_AM31

  • Ampreg 36 Harz

    Ampreg 36 resin

    AmpregTM 36 is Gurit's premium epoxy laminating system and is particularly suitable for the production of large high-performance components. The excellent mechanical properties and the high glass transition temperatures (Tg) achievable by moderate annealing make the AmpregTM 36 system suitable for applications with high mechanical loads, especially also when high temperatures may occur. AmpregTM 36 is optimized for hand lay-up processes with and without vacuum, but can also be used in other processes such as RTM (resin transfer molding), vacuum infusion, pultrusion and filament winding. MAIN FEATURES
    • Improved impregnation of the fabric with lower initial compound viscosity.
    • Faster attainment of mechanical properties when cured in ambient air
    • Excellent bending performance without compromising tensile performance
    • Lloyd's Register & DNV certified

    TDS_DE_AM36

  • Ampreg 3x Härter

    Ampreg 3x hardener

    Ampreg™ 3X hardeners are available in "fast", "standard", "slow", "extra-slow" and "ultra-slow" hardener speeds and are suitable for Ampreg™ hand lay-up systems 30, 31 and 36 and Prime™ 37 infusion resin. MAIN FEATURES
    • Low initial mixed viscosity and good cure characteristics at room temperature
    • Tough resin matrix for good mechanical properties of the laminate
    • Lloyds Register and DNV-GL certifications.

    TDS_DE_AM30
    TDS_DE_AM31
    TDS_DE_AM36
    TDS_DE_PRIME37

    DE_Ampreg-3X-Adhesion-Promoter

  • Crystic Polyesterharz

    Crystic 489PA Polyester resin

    CRYSTIC 489 PA Polyester resin isophthalic acid-based, low stryolemersion.

    TDS_ENG_CRYSTIC489PA

  • Crystic Polyesterharz

    Crystic VE679

    Crestamould VE679 venyl ester resin & skincoat, pre-accelerated, low stryolemmision.

    TDS_EN_Crystic_VE679-03PA

     

  • MEKP hardener

    Hardener MEKP for polyester based resins & gelcoats, adhesive resins. MEKP hardener is a universal standard MEKP for hand lay-up, fiber spraying, winding and centrifugal processes as well as for gelcoats, polymer concrete and many other processes. In addition to cobalt accelerators (Co), a much faster reaction with shorter demolding times can be achieved by using promoters such as dimethylaniline (DMA). Each UP resin requires a matched MEKP accelerator system. The required quantities depend on various factors, such as processing method, resin type, required processing and pot life, wall thickness, processing temperature, co-use of fillers and optimum metering quantity of MEKP and accelerator.

    TDS_DE_MEKP