Loading...
Ampro Härter

Ampro hardener

Ampro™ hardeners are available in "fast", "slow" and "extra-slow" hardener speeds to fit Ampro™, Ampro BIO and Ampro SEAL resins.

MAIN FEATURES

  • Mixing ratio of resin to hardener of 100:30 by weight.

TDS_DE_AMPRO
TDS_DE_AMPRO_BIO
TDS_DE_AMPRO_CLR

Artikelnummer: n. a. Kategorien: , , , , , , ,

Wenn Sie noch kein Kundenkonto eröffnet haben, kontaktieren Sie bitte Ihren Ansprechpartner bei CTM oder senden uns eine Zugangsanfrage.

Ähnliche Produkte

  • Ampreg 30 Harz

    AmpregTM 30 resin

    Optimized for the manufacture of large composite structures using hand lay-up and vacuum processes, AmpregTM 30 offers enhanced worker safety through careful selection of low-toxicity raw materials. The relatively low initial mixed viscosity of AmpregTM 30 allows for easy wetting through of heavy reinforcements. AmpregTM 30 was developed to provide excellent mechanical and thermal properties for both ambient temperature cures and moderate temperature (50°C) post-cures. This system is available with a range of curing speeds from fast to extra slow and in a variety of formats from small pack sizes to drums and IBCs. KEY FEATURES
    • Low initial viscosity of resin/hardener mixture
    • Good curing even without post-curing at elevated temperatures
    • Non-pigmented resins and hardeners
    • Improved safety and health aspects through LRT technology
    • Optimized for hand laminates
    • Excellent fiber saturation
    • Lloyd's Register & DNV certified

    TDS_DE_AM30

  • Crystic Polyesterharz

    Crystic 489PA Polyester resin

    CRYSTIC 489 PA Polyester resin isophthalic acid-based, low stryolemersion.

    TDS_ENG_CRYSTIC489PA

  • Ampro Epoxyharz

    Ampro — The allrounder

    Ampro is the improved successor to SP106, which has proven itself for many years. It is a multi-purpose epoxy system for gluing, coating and filling and is particularly suitable for the production of wood-epoxy composite components. AmproTM CLR hardener is recommended for highly transparent coatings. MAIN FEATURES
    • Mixing ratio 3 : 1 by volume
    • No surface residues, even at +5°C
    • For bonding, laminating, filling and filleting
    • No armin redness

    TDS_DE_AMPRO