Loading...
Ampro Bio Epoxyharz

Ampro BIO – The sustainable

AmproTM Bio is a multi-purpose epoxy and is made with over 40% organic content from pressed coconut shell oil, making it extremely sustainable. Together with flat fibers and Kerdyn PET foam made from recycled bottles, it is a sustainable alternative. The hardeners are the same as for the AmproTM system.

MAIN FEATURES

  • Mixing ratio 3 : 1 by volume
  • No surface residues, even at +5°C
  • For bonding, laminating, filling and filleting
  • No armin redness

TDS_DE_AMPRO_BIO

Artikelnummer: n. a. Kategorien: , , , , , , ,

Einloggen um Preise zu sehen.

Wenn Sie noch kein Kundenkonto eröffnet haben, kontaktieren Sie bitte Ihren Ansprechpartner bei CTM oder senden uns eine Zugangsanfrage.

Einloggen um Preise zu sehen.

Ähnliche Produkte

  • Ampreg 3x Härter

    Ampreg 3x hardener

    Ampreg™ 3X hardeners are available in "fast", "standard", "slow", "extra-slow" and "ultra-slow" hardener speeds and are suitable for Ampreg™ hand lay-up systems 30, 31 and 36 and Prime™ 37 infusion resin. MAIN FEATURES
    • Low initial mixed viscosity and good cure characteristics at room temperature
    • Tough resin matrix for good mechanical properties of the laminate
    • Lloyds Register and DNV-GL certifications.

    TDS_DE_AM30
    TDS_DE_AM31
    TDS_DE_AM36
    TDS_DE_PRIME37

    DE_Ampreg-3X-Adhesion-Promoter

  • Ampro CLR Härter

    Ampro CLR hardener

    AmproTM CLR is the improved successor of SP320 and SP115, which have proven themselves for many years. It is an extremely clear multi-purpose epoxy system with improved UV properties and is particularly suitable for coating natural wood and building surfboards. The resin base is AmproTM resin and the hardener is specially formulated. MAIN FEATURES
    • Extremely clear multi-purpose epoxy system
    • Mixing ratio 3:1 by volume

    TDS_DE_AMPRO

  • MEKP hardener

    Hardener MEKP for polyester based resins & gelcoats, adhesive resins. MEKP hardener is a universal standard MEKP for hand lay-up, fiber spraying, winding and centrifugal processes as well as for gelcoats, polymer concrete and many other processes. In addition to cobalt accelerators (Co), a much faster reaction with shorter demolding times can be achieved by using promoters such as dimethylaniline (DMA). Each UP resin requires a matched MEKP accelerator system. The required quantities depend on various factors, such as processing method, resin type, required processing and pot life, wall thickness, processing temperature, co-use of fillers and optimum metering quantity of MEKP and accelerator.

    TDS_DE_MEKP