Loading...
Crystic Polyesterharz

Crystic 489PA Polyester resin

CRYSTIC 489 PA Polyester resin isophthalic acid-based, low stryolemersion.

TDS_ENG_CRYSTIC489PA

Artikelnummer: n. a. Kategorien: ,

Wenn Sie noch kein Kundenkonto eröffnet haben, kontaktieren Sie bitte Ihren Ansprechpartner bei CTM oder senden uns eine Zugangsanfrage.

Ähnliche Produkte

  • MEKP hardener

    Hardener MEKP for polyester based resins & gelcoats, adhesive resins. MEKP hardener is a universal standard MEKP for hand lay-up, fiber spraying, winding and centrifugal processes as well as for gelcoats, polymer concrete and many other processes. In addition to cobalt accelerators (Co), a much faster reaction with shorter demolding times can be achieved by using promoters such as dimethylaniline (DMA). Each UP resin requires a matched MEKP accelerator system. The required quantities depend on various factors, such as processing method, resin type, required processing and pot life, wall thickness, processing temperature, co-use of fillers and optimum metering quantity of MEKP and accelerator.

    TDS_DE_MEKP

  • Ampreg 3x Härter

    Ampreg 3x hardener

    Ampreg™ 3X hardeners are available in "fast", "standard", "slow", "extra-slow" and "ultra-slow" hardener speeds and are suitable for Ampreg™ hand lay-up systems 30, 31 and 36 and Prime™ 37 infusion resin. MAIN FEATURES
    • Low initial mixed viscosity and good cure characteristics at room temperature
    • Tough resin matrix for good mechanical properties of the laminate
    • Lloyds Register and DNV-GL certifications.

    TDS_DE_AM30
    TDS_DE_AM31
    TDS_DE_AM36
    TDS_DE_PRIME37

    DE_Ampreg-3X-Adhesion-Promoter

  • Ampreg 36 Harz

    Ampreg 36 resin

    AmpregTM 36 is Gurit's premium epoxy laminating system and is particularly suitable for the production of large high-performance components. The excellent mechanical properties and the high glass transition temperatures (Tg) achievable by moderate annealing make the AmpregTM 36 system suitable for applications with high mechanical loads, especially also when high temperatures may occur. AmpregTM 36 is optimized for hand lay-up processes with and without vacuum, but can also be used in other processes such as RTM (resin transfer molding), vacuum infusion, pultrusion and filament winding. MAIN FEATURES
    • Improved impregnation of the fabric with lower initial compound viscosity.
    • Faster attainment of mechanical properties when cured in ambient air
    • Excellent bending performance without compromising tensile performance
    • Lloyd's Register & DNV certified

    TDS_DE_AM36