Loading...
Ampreg 31 Harz

Ampreg<sup>TM</sup> 31 resin

The system has a higher run-off resistance than AmpregTM 30 and with the choice of 5 hardeners offers a complete system for almost any application. AmpregTM 31 is designed for excellent mechanical properties and offers optimum strength even with cold curing and moderate annealing at 50°C. The new LRT technology, through the use of simple black light lamps, allows easy inspection of work clothing and workplace for epoxy residues, making it easy to monitor employee health.

MAIN FEATURES

  • Viscosity optimized for fabric application and run-off resistance
  • Good curing in ambient air
  • Robust resin matrix provides good mechanical properties of the finished laminate
  • Lloyd's Register & DNV certified

TDS_DE_AM31

Artikelnummer: n. a. Kategorien: ,

Wenn Sie noch kein Kundenkonto eröffnet haben, kontaktieren Sie bitte Ihren Ansprechpartner bei CTM oder senden uns eine Zugangsanfrage.

Ähnliche Produkte

  • Ampro Härter

    Ampro hardener

    Ampro™ hardeners are available in "fast", "slow" and "extra-slow" hardener speeds to fit Ampro™, Ampro BIO and Ampro SEAL resins. MAIN FEATURES
    • Mixing ratio of resin to hardener of 100:30 by weight.

    TDS_DE_AMPRO
    TDS_DE_AMPRO_BIO
    TDS_DE_AMPRO_CLR

  • Ampreg 30 Harz

    AmpregTM 30 resin

    Optimized for the manufacture of large composite structures using hand lay-up and vacuum processes, AmpregTM 30 offers enhanced worker safety through careful selection of low-toxicity raw materials. The relatively low initial mixed viscosity of AmpregTM 30 allows for easy wetting through of heavy reinforcements. AmpregTM 30 was developed to provide excellent mechanical and thermal properties for both ambient temperature cures and moderate temperature (50°C) post-cures. This system is available with a range of curing speeds from fast to extra slow and in a variety of formats from small pack sizes to drums and IBCs. KEY FEATURES
    • Low initial viscosity of resin/hardener mixture
    • Good curing even without post-curing at elevated temperatures
    • Non-pigmented resins and hardeners
    • Improved safety and health aspects through LRT technology
    • Optimized for hand laminates
    • Excellent fiber saturation
    • Lloyd's Register & DNV certified

    TDS_DE_AM30

  • Crystic Polyesterharz

    Crystic VE679

    Crestamould VE679 venyl ester resin & skincoat, pre-accelerated, low stryolemmision.

    TDS_EN_Crystic_VE679-03PA